If you are into MM cartridges then try to get one of these

[Balle Clorin]

Why on earth does AT degrade channel crosstalk for every new cartridge generation , it used to be 30+ now we are down to -26 , Ortofon territory...

 

[Lynnot]

Hi,

lowering specs will allow for more MM generators passing quality inspection.
So your typical AT MM is still over 30 dB but few of them will only reach 26 dB.

Best regards, Tony

 

[daytona600]

New from Jico Shure V15 III

 

[Balle Clorin]

I could not find it..
And it looks like a Shure V15 III with a Jico , what is then the news?

 

[daytona600]

.
Introducing the
SHURE V15 Type III Reissue by JICO
An Iconic MM Cartridge Returns
◉ Overcoming the Pressure of
Reviving a Legend
The SHURE V15 Type III is celebrated worldwide as a pinnacle in MM cartridges for listening. Reviving such an iconic model was no small feat. JICO pooled its technical expertise, engaging in meticulous analysis, testing, and refinement over four years. We believe we’ve successfully met the challenge of resurrecting this legendary cartridge.
◉ The M44 Reissue:
A Prelude to the V15 Type III
The internal structures of the M44 and V15 Type III differ significantly. Released seven years after the V15 Type II, the V15 Type III featured an enhanced magnetic circuit and a lighter stylus, resulting in more faithful signal reproduction from vinyl grooves. When we began developing the M44 reissue in 2019, our sights were set on the V15 Type III, with the understanding that success with the M44 was crucial for the V15’s revival. In total, this project spanned six years of dedication and refinement.
“We are proud to announce the release of the SHURE V15 Type III MM cartridge reissue, originally launched by SHURE in 1973. After completing the M44 reissue development in 2021, we immediately embarked on the V15 Type III project, dedicating four years to its development. Building upon the knowledge and experience gained from the M44, we meticulously researched and developed the cartridge, striving to recreate the SHURE sound of the era. Please look forward to the timeless yet new “JICO Sound.”
- Yukihiro Nakagawa, President and CEO, JICO
Stay tuned for the next chapter in the JICO Evolution, as we continue to push the boundaries of high-fidelity audio reproduction.

 

[Argonaut]

.
Introducing the
SHURE V15 Type III Reissue by JICO
An Iconic MM Cartridge Returns

Any indication on pricing ?

 

[Balle Clorin]

Lots of news on cartridges the last months.
Nagaoka MP 700
Ortofon MC X series
AudioTechnica VMX series
Vinyl is living well again

 

[Lynnot]

Hi,

last Sunday I mounted an ADC TRX-2 and enjoy it very much:

This is one from a series of three Japan built ADC cartridges using Acutex/Azden technology.
In the right set-up these are marvelous.

So many good MM cartidges to choose from.

Best regards, Tony

 

[Lynnot]

It's an Audio Technica AT-150 Ti, very nice too.

 

[godofwealth]

I use a Stanton 881 Mk2 on my Technics SP-10 Mk2 that sounds pretty nice. I have a stash of Shure V15 Vxmr as well. Plenty of great bargains to be had in the used MM cartridge market.

 

[jeff1225]

I use a Stanton 881 Mk2 on my Technics SP-10 Mk2 that sounds pretty nice. I have a stash of Shure V15 Vxmr as well. Plenty of great bargains to be had in the used MM cartridge market.

View attachment 154407

I’ve always wanted to try this MM.

 

[jeff1225]

Any indication on pricing ?

The Shure is fantastic with the Jico SAS. And I love just 1.5gm of pressure on my vinyl.

 

[Argonaut]

The Shure is fantastic with the Jico SAS. And I love just 1.5gm of pressure on my vinyl.

Just to clarify Jeff , are you refering to the Jico Re-issue or a vintage Shure mit Jico stylus ?

 

[Lynnot]

a 50 year old Shure V15-III with Jico SAS Needle

 

[Balle Clorin]

Original Shure V15 IV and my Jico SAs B is dead flat on Parks Audio Puffin Air =1

Now I know how a linear cartridge sounds like