I have a friend building a home theatre. My understanding is Subs are the hardest part of any installation. He is looking at a Marantz Amp 20 and AV20. I was advocating more than 1 sub to get even distribution of bass in the room. The room is probably 18 feet deep and 25 feet wide. Is there a processor that handles multiple subs and has a built in measuring system that will integrate multiple subs into the space. He has one Def Tech sub already. He is open to others.
Suggestions on a processor and subs to integrate into the system.
the best one for that is the Tinnov Altitude 16, but it's not cheap. it can handle any subs. in my system the Trinnov handles 3 Funk Audio 18.0 subs and does a great job in my 9.3.6 multi-channel Dolby Atmos system.
I have a friend building a home theatre. My understanding is Subs are the hardest part of any installation. He is looking at a Marantz Amp 20 and AV20. I was advocating more than 1 sub to get even distribution of bass in the room. The room is probably 18 feet deep and 25 feet wide. Is there a processor that handles multiple subs and has a built in measuring system that will integrate multiple subs into the space. He has one Def Tech sub already. He is open to others.
Suggestions on a processor and subs to integrate into the system.
Isn't 1 sub prone to the same issues as a 2 channel system. There will be a sweet spot for bass. And other seats may be, not so good. Won't more than 1 sub give even response in the room.
Isn't 1 sub prone to the same issues as a 2 channel system. There will be a sweet spot for bass. And other seats may be, not so good. Won't more than 1 sub give even response in the room.
Isn't 1 sub prone to the same issues as a 2 channel system. There will be a sweet spot for bass. And other seats may be, not so good. Won't more than 1 sub give even response in the room.
I was proposing 3 subs. Two built into front left and right channels that get front channel bass signal. The one subwoofer gets the .1 LFE signal. There is some overlap when the crossovers are set with this in mind.
I use one subwoofer in the front corner and two of the side rear speakers have built in subs and are configured for full range. Works great.
One would have to try it and play with the sub position and tuning.
I have a friend building a home theatre. My understanding is Subs are the hardest part of any installation. He is looking at a Marantz Amp 20 and AV20. I was advocating more than 1 sub to get even distribution of bass in the room. The room is probably 18 feet deep and 25 feet wide. Is there a processor that handles multiple subs and has a built in measuring system that will integrate multiple subs into the space. He has one Def Tech sub already. He is open to others.
Suggestions on a processor and subs to integrate into the system.
Speakers are already in the walls and ceiling. Paradigm. If the AV20 handles 4, do you think it will room correct all 4 for even response at multiple locations.
I have a friend building a home theatre. My understanding is Subs are the hardest part of any installation. He is looking at a Marantz Amp 20 and AV20. I was advocating more than 1 sub to get even distribution of bass in the room. The room is probably 18 feet deep and 25 feet wide. Is there a processor that handles multiple subs and has a built in measuring system that will integrate multiple subs into the space. He has one Def Tech sub already. He is open to others.
Suggestions on a processor and subs to integrate into the system.
Would be great to know what speakers and speakers layout he have.
First suggestions is AVM90 - reasonable price/performance, but it is more expensive then AV20.
AVM90 have better audio section, but it lacks streaming - specifications say it is Roon Ready, but it is only with AirPlay.
For streaming you need external streamer connected with digital cable - coax or optical - extra expencies if it is systrem for HC and Stereo.
AVM90 review on Audioholics:
The AVM 90 8K is the first worthy successor to Anthem's D2v. Objectively and subjectively it's Anthem’s best-sounding preamp processor—EVER. Possibly the apex predator of 15.4CH pre-pros under $8,000.
I have a friend building a home theatre. My understanding is Subs are the hardest part of any installation. He is looking at a Marantz Amp 20 and AV20. I was advocating more than 1 sub to get even distribution of bass in the room. The room is probably 18 feet deep and 25 feet wide. Is there a processor that handles multiple subs and has a built in measuring system that will integrate multiple subs into the space. He has one Def Tech sub already. He is open to others.
Suggestions on a processor and subs to integrate into the system.
The key here is the measurement/DSP/EQ system and, currently, the most advanced consumer system is DiracLive-ART (Active Room Treatment) which can handle effectively multiple subs. DL-ART is available on Maranz AV10 and on Storm Audio devices. More coming from Hyperion (https://www.hyperionprofessional.com/processors) and others.
Not sure how it handles multiples subs for DSP. Individually or in aggregate but it is not capable of utilizing the multiple subs (or other speakers) to support each others corrections. Same can be said for the otherwise admirable Anthem devices.
Kal is correct. Dirac Live ART is a very powerful tool that can yield excellent results.
Having someone who is experienced and able to extract the most from the software is important.
The higher end Denon AVR’’s have 4 sub outs, and I’m pretty sure they can also handle Dirac Live ART now.
Even Audysey can do a decent job once you lift the sub level a few DB.
The Trinnov processors are excellent and feature ‘Waveforming” (DBA) with front and rear subs which is superb.
Another option is to use MiniDSP 2x4HD or FLEX HTX to manage the bass, though this requires quite a bit of work with REW, measurements and creating an in room response.
Not sure how it handles multiples subs for DSP. Individually or in aggregate but it is not capable of utilizing the multiple subs (or other speakers) to support each others corrections. Same can be said for the otherwise admirable Anthem devices.
Hi Kal,
I think that if someone is looking to achieve the flattest frequency and most time aligned response and is willing to take the time to get there then Dirac is an excellent option.
Lyngdorf focuses primarily on the phase/time alignment aspects.
Room Perfects strength is in the bass domain.
If one is looking for an overall immersive listening experience (movies and music) I would not dismiss the Lyngdorf solely based on the things you mention.
That being said, Dirac can be implemented along with the Room Perfect but most prefer without the Dirac.
The only limitations of the Lyngdorf software is the person using it.
Can you give me (or provide a link to) information about the evolution of RoomPerfect? I last used it years ago and, while my experience with it was quite positive, my contextual references have evolved since then.
