I listened with my own ears to the same Altec 817 speakers that Kedar (bonzo75) is talking about, from Yanislav's house, and I can confirm what he said, they have a sublime sound.
WOW - now that sound is something very special..
I listened with my own ears to the same Altec 817 speakers that Kedar (bonzo75) is talking about, from Yanislav's house, and I can confirm what he said, they have a sublime sound.
They truly have a special sound, I have never heard such a coherent sound from any other speaker regardless of price.WOW - now that sound is something very special..
How about we start with Verdi's Requiem recorded by RCA in the Soria box set (side note: Robert Soria worked for Angel records and is why their early editions have the wood dowel spine; he went to RCA and produced the Soria series box sets)? Side one track 2 (Dies Irae). That recording seems to be done without compression and can bring many systems to their respective knees in a matter of seconds if you try for any kind of realistic volume.
www.lowtherloudspeakers.com
Yes I have commented on it, both this and the speaker, you can do a search on lowther by me.Did someone listen to this?![]()
![]()
Lowther PX4 Valve Amplifier: The Essence of Acoustic Purity
Rediscover music's soul with Lowther's PX4 Valve Amplifier. Hand-crafted in Great Britain, this masterpiece revives 1940s designs with modern precision, offering purity of signal and emotional depth in every note.www.lowtherloudspeakers.com
@Atmasphere has mentioned it before. it's a fun ride.Okay, we can start there ... it truly is a challenging piece. In room my system is not brought entirely to its knees ... maybe to its elbows. The Soria series with the wood dowels are quite elaborate with beautiful artwork; Soria did other issuances that were not quite as fancy. I also like Reiner doing Strauss' Don Quixote.
Videos - oomph, tympani, menace, power
Sorry, Peter, I should've just posted the current list here.www.whatsbestforum.com
Try around 6:10 for the bombast.
Indeed it is.@Atmasphere has mentioned it before. it's a fun ride.
There is a thread on thisDo you know of a Carmina version that is both a good performance and recording?
Its a good recording but I prefer other performances, at least if what I've heard of this one on YT is correct.also quite good
Thanks!There is a thread on this
Thread 'Searching for Best Version of Carmina Burana ?'
https://www.whatsbestforum.com/threads/searching-for-best-version-of-carmina-burana.36402/
Kegel version is really good ,eterna makes really good classical recordings,you used to find it at the flea market for 2€ here in germanyI have both Die Kluge and Carmina Burana on tape from Horsch House
ticks both boxes
![]()
Carl Orff - Carmina Burana — Horch House
Sales Prices for Germany incl. 19% sales tax (VAT) Pure Master: 480,00 € Standard Master: 570,00 € Studio Master: 595,00 € Prices for other EU Countries calculated at checkout before purchase. Prices outside EU Countries excluding VAT.www.horchhouse.com
Hello and thank you for the wonderful compliments on my W60's!Al , might you post the output rating for your amps as a guide for us to work with .
In the meantime I would recommend a pair of 1960’s Wharfedale W60’s which you should be able to pick up on the used market for $500 give or take for a nice pair , for my part I would look for the slightly earlier W60 as the later W60D can exhibit problems with the foam surrounds , they are a tad rolled off in the upper octaves , however they are quite lovely in the midrange and for near field listening .
Check out the many video posts from Don @No Regrets featuring his pair making beautiful music , several can be found in the female vocals thread Viz :
Post your female vocal videos
You're blessed to have to pairs of highly regarded amplifiers there! I'm curious, if you could only have one pair, which do you think you would keep to pair with your current speakers? Thanks, Don. Both the 110W Lamm M1.2 and the 18W Lamm ML2.2 work well with the JBL M9500 speakers at 4Ohm...www.whatsbestforum.com
Post your female vocal videos
You're blessed to have to pairs of highly regarded amplifiers there! I'm curious, if you could only have one pair, which do you think you would keep to pair with your current speakers? Thanks, Don. Both the 110W Lamm M1.2 and the 18W Lamm ML2.2 work well with the JBL M9500 speakers at 4Ohm...www.whatsbestforum.com
Post your female vocal videos
Blossom Dearie live at Ronnie Scott’s (singing and playing piano), from this recently released compilation: https://open.qobuz.com/album/aurabpf8lwgja That lovely track is from this original album: https://en.m.wikipedia.org/wiki/Blossom_Time_at_Ronnie_Scott%27swww.whatsbestforum.com
My only caviat being their min rating of 5 Watts /8 Ohms if memory serves , as your 300B amp might be on the borderline with the W60’s
You could add Berning and Shindo.Had my ears opened recently auditioning an old Don Garber/Fi Audio stereo 2A3/45 amp. Running through a pair of Cornwall I's with I'm not sure what modifications. Running the 45 tubes, it was beautifully delicate up top and transparent in the mids, but lacking in bass. Running 2A3's some of that bass drive and heft came back, but maybe not quite as special in the treble. Both did some things I've not encountered from 300B amps, and I was quite impressed. (Though with both sets of tubes, the amp broke up quite audibly at medium-high listening levels. Not a surprise, given how low-powered both driver tubes are, I suppose, though it was unpredictable which tracks would make them distort. I wondered if one of the input tubes was perhaps below specs, as the distortion seemed to be mostly on the right channel.)
Another surprise, the old Garber absolutely slayed an Audio Research Ref75 (non-SE) that I'd expected to like quite a bit. The Ref75 only had about 10 minutes to warm up though.
I'm tempted to pick up the Garber, but I'd have to travel with it in my carry-on, and it seems somewhat delicate. Also, I'm sort of wondering if I can do better with a similarly designed but higher spec'd 2A3 or 45 amp (better transformers, separate PSU, etc.). I know that Don Garber was hugely respected and influential, but perhaps others have brought the SET craft further along in the last couple decades?
I believe the Fi Audio was using Magnequest transformers, though I don't know if they were the standard or silver wound models. I get the sense from poking around online that better results can be had with Hashimoto (which Garber himself later switched to) or Tamura iron. Anyway, now I'm exploring amps to run my Klipsch Forte III (99dB) and Fyne Vintage Classic XII (96dB). The Fyne, especially, might like a bit more power, but i guess I'll only find out from trying some amps. I listen at medium volumes typically.
Also, putting together a short list of SET designers. Any to add? I'll also go back through this thread.
Triode Labs
Yamamoto
Aric Audio
Tron
AirTight
Silbatone
Silvercore
Oliver Sayes
Had my ears opened recently auditioning an old Don Garber/Fi Audio stereo 2A3/45 amp. Running through a pair of Cornwall I's with I'm not sure what modifications. Running the 45 tubes, it was beautifully delicate up top and transparent in the mids, but lacking in bass. Running 2A3's some of that bass drive and heft came back, but maybe not quite as special in the treble. Both did some things I've not encountered from 300B amps, and I was quite impressed. (Though with both sets of tubes, the amp broke up quite audibly at medium-high listening levels. Not a surprise, given how low-powered both driver tubes are, I suppose, though it was unpredictable which tracks would make them distort. I wondered if one of the input tubes was perhaps below specs, as the distortion seemed to be mostly on the right channel.)
Another surprise, the old Garber absolutely slayed an Audio Research Ref75 (non-SE) that I'd expected to like quite a bit. The Ref75 only had about 10 minutes to warm up though.
I'm tempted to pick up the Garber, but I'd have to travel with it in my carry-on, and it seems somewhat delicate. Also, I'm sort of wondering if I can do better with a similarly designed but higher spec'd 2A3 or 45 amp (better transformers, separate PSU, etc.). I know that Don Garber was hugely respected and influential, but perhaps others have brought the SET craft further along in the last couple decades?
I believe the Fi Audio was using Magnequest transformers, though I don't know if they were the standard or silver wound models. I get the sense from poking around online that better results can be had with Hashimoto (which Garber himself later switched to) or Tamura iron. Anyway, now I'm exploring amps to run my Klipsch Forte III (99dB) and Fyne Vintage Classic XII (96dB). The Fyne, especially, might like a bit more power, but i guess I'll only find out from trying some amps. I listen at medium volumes typically.
Also, putting together a short list of SET designers. Any to add? I'll also go back through this thread.
Triode Labs
Yamamoto
Aric Audio
Tron
AirTight
Silbatone
Silvercore
Oliver Sayes
SW1X Audio Design offers very high quality SET amplifiers at many price points. EL84, 6V6 (both as triodes), 45, 2A3, and 300B variants are available.Had my ears opened recently auditioning an old Don Garber/Fi Audio stereo 2A3/45 amp. Running through a pair of Cornwall I's with I'm not sure what modifications. Running the 45 tubes, it was beautifully delicate up top and transparent in the mids, but lacking in bass. Running 2A3's some of that bass drive and heft came back, but maybe not quite as special in the treble. Both did some things I've not encountered from 300B amps, and I was quite impressed. (Though with both sets of tubes, the amp broke up quite audibly at medium-high listening levels. Not a surprise, given how low-powered both driver tubes are, I suppose, though it was unpredictable which tracks would make them distort. I wondered if one of the input tubes was perhaps below specs, as the distortion seemed to be mostly on the right channel.)
Another surprise, the old Garber absolutely slayed an Audio Research Ref75 (non-SE) that I'd expected to like quite a bit. The Ref75 only had about 10 minutes to warm up though.
I'm tempted to pick up the Garber, but I'd have to travel with it in my carry-on, and it seems somewhat delicate. Also, I'm sort of wondering if I can do better with a similarly designed but higher spec'd 2A3 or 45 amp (better transformers, separate PSU, etc.). I know that Don Garber was hugely respected and influential, but perhaps others have brought the SET craft further along in the last couple decades?
I believe the Fi Audio was using Magnequest transformers, though I don't know if they were the standard or silver wound models. I get the sense from poking around online that better results can be had with Hashimoto (which Garber himself later switched to) or Tamura iron. Anyway, now I'm exploring amps to run my Klipsch Forte III (99dB) and Fyne Vintage Classic XII (96dB). The Fyne, especially, might like a bit more power, but i guess I'll only find out from trying some amps. I listen at medium volumes typically.
Also, putting together a short list of SET designers. Any to add? I'll also go back through this thread.
Triode Labs
Yamamoto
Aric Audio
Tron
AirTight
Silbatone
Silvercore
Oliver Sayes
| Steve Williams Site Founder | Site Owner | Administrator | Ron Resnick Site Owner | Administrator | Julian (The Fixer) Website Build | Marketing Managersing |