Introducing Olympus & Olympus I/O - A new perspective on modern music playback

Have you found a SQ advantage to powering from the DCD vs. the stock SMPS? Maybe common grounding helps here?
Is the 12v input of the Synology 5.5mm x 2.1mm? My ancient DS215 has this input. But I’m looking at the DS224+ as a RAID 0 music server.

I never used the stock SMPS since Emile suggested the DCD so that’s what I did.

I am using the DS224+ with 2 12 TB drives, RAID0. I do believe the input is a standard 5.5 x 2.1.
 
I never used the stock SMPS since Emile suggested the DCD so that’s what I did.

I am using the DS224+ with 2 12 TB drives, RAID0. I do believe the input is a standard 5.5 x 2.1.
Thanks. I’ll use the DCD as well, but just curious.
 
Thanks. I’ll use the DCD as well, but just curious.

What LPS are you using with the DCD? Mine is 3-4A which is fine with the NAS, switch and router.
 
Good question. It’s an LTA rated for 12v/3A. The stock SMPS for the DS215 is rated for 5A. The switch and router don’t draw much, but maybe 3A is marginal when adding a NAS. However, RAID 1 with two big drives at full crank will draw a bit more than a single drive transferring low bit rate. If 3-4A works for you, then maybe. Could just use the SMPS for the initial copy.

Are you using the SJ DC4/ARC6?
 
I am using a SJ DC3.5 that I built myself. I chose the DS224+ because it doesn't draw a lot of current and I knew the LPS could handle the router, switch and NAS.
 
I’ll upgrade the LPS sometime. Not sure how good is good enough. I saw a new SJ heading your way when at Vassil’s. A very nice looking build. Didn’t know if it was warranted/required for network duty. He was using a cheap battery for the DCD during our session, lol.
 
My Completely silent SSD NAS setup:

Synology 923+ (four bay, 35 watt), w/ Two Samsung PM893 2.5” 7.68TB Sata SSDs, w/4Gb additional memory, w/NVMe 1Tb cache, w; 10Gb optional port (used with 1Gb Taiko Router, but better quality port than standard).

Sablon Ethernet cable connecting NAS to Taiko Router. Guentaudio Mundorf DC cable to Taiko DCD, fed by Plixir Statement Power Supply with Shunyata Venon V14 power cord, with Nordost Qbase8 Mk3 power distributor, with Echole Omnia power cord, to Furutech NFC-r outlet.
 
My Completely silent SSD NAS setup:

Synology 923+ (four bay, 35 watt), w/ Two Samsung PM893 2.5” 7.68TB Sata SSDs, w/4Gb additional memory, w/NVMe 1Tb cache, w; 10Gb optional port (used with 1Gb Taiko Router, but better quality port than standard).

Sablon Ethernet cable connecting NAS to Taiko Router. Guentaudio Mundorf DC cable to Taiko DCD, fed by Plixir Statement Power Supply with Shunyata Venon V14 power cord, with Nordost Qbase8 Mk3 power distributor, with Echole Omnia power cord, to Furutech NFC-r outlet.

The Samsung SSDs are very nice. I am waiting (hoping) that the price will come down eventually.
 
Hi Emile.
. If it is never used, can the digital Spdif/AES card be replaced free of charge, when available, by the Aries Cerat digital output card from the Olympus? (It will be another matter what Stavros develops as a DAC input)


We'll have to look into that. There's a limit to what we can do, the Euro 6600 / USD 7200 early adopters discount combined with a full reimbursement of your prior Extreme purchase leaves us with little to no room for further discounts. To be blunt, the decision basically is to either charge more for future daughterboards and take trade ins, or price them lower and don't take trade ins. I'm currently leaning towards the latter, if only to save on personnel / handling costs.
 
Hi Emile,

I read the O-I/O instruction manual on switching the analog and digital xdmi cards and it instructs flipping the I/O unit upside down to make the switch. The manual instructs then flipping back the I/O unit right side up after switching the cards.

But your post suggests that leaving the I/O unit upside down not only makes switching the cards faster and more convenient, but the I/O unit also sounds just as great upside down
- at least for quick back and forth comparison purposes?

Yeah, that's what I do, mine is always upside down ;)
 
  • Like
Reactions: cmarin
Hi Taiko team!

Just had a question regarding the headphone amplifier into the Olympus? Has there been any more thought given to this over the past few months? Would make all headphone enthusiasts very happy! :)

Thank you!

Yes that is on the list too, most likely the "preamp" version will be able to either drive headphones directly or have an additional headphone output.
 
Thanks for posting. Very exciting as #39 is getting really close now!
I'm wondering if I should skip the internal storage and get a USB drive to plug into the Taiko router for my music files. I believe the router needs a firmware update to be able to use a windows formatted drive. Is that capability expected soon? Or is it better to use a NAS?

We have the USB drive support for the Router working but it's not completely stable yet.
 
  • Like
Reactions: aLLeARS and Armsan
Absolutely. —-huge difference indeed. I was astounded by that
Did you try a high quality power cord on the OIO as well? Did that also make a difference?
 
We'll have to look into that. There's a limit to what we can do, the Euro 6600 / USD 7200 early adopters discount combined with a full reimbursement of your prior Extreme purchase leaves us with little to no room for further discounts. To be blunt, the decision basically is to either charge more for future daughterboards and take trade ins, or price them lower and don't take trade ins. I'm currently leaning towards the latter, if only to save on personnel / handling costs.
It seems that Lampizator users were lucky then, as they are the only ones who could opt for the digital card of their DAC instead of the SPDIF-AES.
 
Did you try a high quality power cord on the OIO as well? Did that also make a difference?
Indeed yes. As always, Emile proves to be right
 
  • Like
Reactions: MOTU
For those with interest, Part 2 of my Olympus review just got posted:

 
It seems that Lampizator users were lucky then, as they are the only ones who could opt for the digital card of their DAC instead of the SPDIF-AES.

Honestly I don’t think you’ll end up paying more whether you’d trade it in or not. The Aries Cerat implementation is quite different from any others we’ve done, costs divided by a smaller user base.
 
  • Like
Reactions: John T
For those with interest, Part 2 of my Olympus review just got posted:

Fabulous Ray.....I look forward to meeting you next week at my open house and to commend you for a job well done
 
For those with interest, Part 2 of my Olympus review just got posted:

well done!!! what do you believe the best external storage solution is?
 
David, I did not experiment with different storage options. I only have my home file server right now. I'm looking forward to reading different experiences of folks as more people get their Olympus's (Olympi?) and experiment with storage
 

About us

  • What’s Best Forum is THE forum for high end audio, product reviews, advice and sharing experiences on the best of everything else. This is THE place where audiophiles and audio companies discuss vintage, contemporary and new audio products, music servers, music streamers, computer audio, digital-to-analog converters, turntables, phono stages, cartridges, reel-to-reel tape machines, speakers, headphones and tube and solid-state amplification. Founded in 2010 What’s Best Forum invites intelligent and courteous people of all interests and backgrounds to describe and discuss the best of everything. From beginners to life-long hobbyists to industry professionals, we enjoy learning about new things and meeting new people, and participating in spirited debates.

Quick Navigation

User Menu

Steve Williams
Site Founder | Site Owner | Administrator
Ron Resnick
Site Owner | Administrator
Julian (The Fixer)
Website Build | Marketing Managersing