Hi
I am having a problem with my Studer A807. When I press "play", the pinch roller engages but disengages after 1 or 2 seconds. At times it engages and plays for a while and then it disengages and stops. After checking, I realise that the pinch roller engages but the capstan is not turning. At...
Hi
My Studer A807 has suddenly stop playing. I can rewind and fast forward but when I press play, the tape is not moving. What can possibly be the problem.
Thanks
Hi
I am having this problem with my Revox. When I start play, at the beginning, there is no problem and it plays as normal. After about 40 mins, there is a slight drag. The take up motor gets very hot and there is no torque. If I place my finger on the motor, just lightly it slows down and it...
Hi
I am having a problem with my revox B77 while recording. If I playback a pre recorded tape, it sound clean and noise free. If I make a new recording and play it back, at the beginning both sides sound clean and noise free. After about 30 mins, one side starts to have some noise(frying sound)...
Hi
I am having a problem with my studer. When I press play, the recorder does play, but the take up motor (right hand side) moves slower than the supply motor (left hand side). What happens is that the excess tape from the left reel gets stuck into the reel. It looks like both the motors are...
Hi
Earlier I had a problem of unable to record at 15ips with this recorder. I rectified the problem with the guidance from the forum. The problem was the bias setting was at zero for 15ips. After that it was recording OK all this while until recently. Now when I record, both channel start...
Hi
I have been doing recordings on my A807 at 7.5ips all this while. Now I tried recording at 15ips, but it is not recording at all. I have set to "Record Ready", pressed the "input" and "line on" buttons but the VU meters do not show of any input signal present. Does this machine need to the...
Hi
I have an old Studer A807. The record head is 1.318. and has badly worn out and I intend to replace it with a 1.317. which a friend gave me. I came to know that to replace a 1.318 record head with a 1.317, certain modification has to be done. What I realise is this : According to the...
Hi
The right channel of my recorder has a very muffled sound, when I play back after recording. I was advise to recalibrate the machine. Referring to the manual, before using the Calibration tape, some pre-alignments have to be done. The erase current and bias pre-adjustment is to be done...
Hi
After recording from a CD player, I play back the recording using "sync" as usual. During playback, the left channel is clear and the high frequencies are clearly heard, but the right channel sound very bassy lacking high frequencies. I suspected the recording head because the head has...
Hi
I am new to this forum. A friend of mine brought this reel to reel to get it fixed. The problem was, the fuses keep blowing. When I first ON the tape player there was no lights on any indicator and the VU meter was dead. Upon opening, I realise that 3 fuses, the +15V, -15V and +50V have...