I understand what the deficits are but can you help me understand how you evaluate them
I would like to refer on my personal practice.
At the beginning of a Setup, the customer and I hear the customer's original audio system.
In the last 10 years I attended between 300 and 400 customers with various audio systems.
Based on this experience I can assess to what extent the potential of the electronics and speakers is exhausted.
Up to 400 visits also means, that I can evaluate the better-known products of the market (cables, line conditioners, power strips and accessories) with regard to their sound properties, because I have heard these components several times in different environments. So I have a reasonable idea of how a particular audio system should sound and which components are the causes for a poor sound quality.
Often, things are even more complicated, because compensation effects may exist between components. For example the bright sound of a cable may be compensated through the dark sound of anyother cable. Compensation is generally a factor, that limits the potential sound quality of an audio system. For this reason in the example both cables are weak points and have to be substituted, to get outstanding results.
To sum up and to answer your question: experience is the most important factor, to identify weak points; experience is supplemented by testing.
Please keep in mind. The identification of weak points is primarily helpful for the question where to start with a SCHNERZINGER setup and whether preconditions for this setup must be realized. The installation of a complete SCHNERZINGER setup however is not a question of measures, to eliminate some weak points. It is a completely new experience of musical reproduction.
I think some level of decorum should apply on WBF. Maybe something our mother's taught us (or hopefully did) might be appropriate here: If you don't have anything good to say, don't say it. Whether you agree or disagree, manufacturers, who are already hesitant to post on the Net, are not going to come to WBF.
Tell me. Would you rather see the manufacturer comment or a bunch of audiophiles speculating about a product?
Obviously we should not blindly accept any statement but if you are in disagreement be constructive about it - specify the statement, your personal opinion/reasoning and ideally what (technical) background this is based on to add credibility to your opinion.
Re the 3 hour break in, this is your opinion. There are plenty of people who think that the true break in happens only once and is not lost when the cables are disconnected and transported around. There may be some settling time but from my personal experiences after the cables are broken in their sound pretty much stabilises with perhaps only minor changes when cables are removed and repositioned in the system. I would argue that this is easily reached in 3 hours, probably much less than this.
Give HJ a break here guys, he is trying to advance the state of the art in cabling and is being very open with us about his beliefs. As if anyone can truly say with certainty what's important and what is not. If you call bullshit back it up or at least be constructive about it.
The SCHNERZINGER® ATOMIC BONDING is a true breakthrough in the development of high end audio cables. The planning target was not - as usual in this line of business – merely a limited “optimization” of long or mono structures from OCC copper or silver (by means of special castings, alloying, cryogenically treatments, etc.), but a complete reformatting of the crystal structure.
This radical development approach was essential, because it takes the aim of an enclosed and most notably permanent stable structure, to have the ability to realize an almost absolutely pure pulse sequence und thus a practically lossless electrical information transmission.
The resulting SCHNERZINGER® MOLECULAR CONDUCTOR has a dramatically increased information density and thus a groundbreaking ability to completely preserve and passionately and vividly communicate the emotion and atmosphere of the recorded event to the listener. (for details see the Audition Report: LISTENING WITH MOLECULAR PROCESSING)
Molecular Procesing:
I know we have gotten very puritan here, I will not use any untoward epithet but some meters will be pegged by thisThe SCHNERZINGER® ATOMIC BONDING is a true breakthrough in the development of high end audio cables. The planning target was not - as usual in this line of business – merely a limited “optimization” of long or mono structures from OCC copper or silver (by means of special castings, alloying, cryogenically treatments, etc.), but a complete reformatting of the crystal structure.
This radical development approach was essential, because it takes the aim of an enclosed and most notably permanent stable structure, to have the ability to realize an almost absolutely pure pulse sequence und thus a practically lossless electrical information transmission.
The resulting SCHNERZINGER® MOLECULAR CONDUCTOR has a dramatically increased information density and thus a groundbreaking ability to completely preserve and passionately and vividly communicate the emotion and atmosphere of the recorded event to the listener. (for details see the Audition Report: LISTENING WITH MOLECULAR PROCESSING)
If someone does believe that this is trying to advance the SOTA by all means disburse and purchase but it is utterly difficult to take this and not think about physiological removal processes ... since some acronyms are no longer allowed.
No schnerzinger cables in my experiences do not compensate but you must remove strongly limiting components out of your system otherwise the Schnerzinger potential is diminished. By the way this is what Mr. Bremmer told me before the the first in home demo, and i think that is what he ment here when saying that he has to check for weak points. For myself i had to remove some things which i now know compensated and limeted the performance.
A.Exploration.
Could you educate me on what is mono-crystal technology? I will be grateful. I also would like to know what are the benefits of such interesting manufacturing process.
Now I must believe that in 3 hours the person would identified my system weaknesses, then compensate or correct them with cables??
A.Exploration.
Could you educate me on what is mono-crystal technology? I will be grateful. I also would like to know what are the benefits of such interesting manufacturing process.
Now I must believe that in 3 hours the person would identified my system weaknesses, then compensate or correct them with cables??
Steve Williams Site Founder | Site Owner | Administrator | Ron Resnick Site Co-Owner | Administrator | Julian (The Fixer) Website Build | Marketing Managersing |