Results 1 to 5 of 5

Thread: New Microcode available for D1/C1/P1/L1/M1/X1

  1. #1
    Addicted to Best!
    Join Date
    Sep 2013
    Location
    Dallas area
    Posts
    230

    New Microcode available for D1/C1/P1/L1/M1/X1

    To all CH Precision owners,
    I happened to check the CH website Friday night and found that new microcode was available for all components. Iíve installed the new code on all of my pieces. The installation was flawless as we have come to expect. Some of the new features I noticed: the displays now auto dim after 10-15 seconds. You can choose the brightness at ďdimĒ from settings. CH are now using all icons for functions instead of words: subsonic filter, mono, phase, etc. have been replaced by icons. On the C1 you can turn the UPnP function on or off from settings. When ďonĒ, you get the additional streaming functions on the C1. One final observation is that CH have made changes to the Network menus and have better standardized the selections for network turn-on/off/ and controls. Your router needs to support PoE and if you plug your components into router slots that support PoE, everything works as expected. Donít forget to download the latest control app to see all of this.

    I had requested that CH begin to add a date to their software updates and you will see that now. I canít say that I noticed any sonic improvements. These would be through changes to the filters on the C1 and it does not appear that changes in this area have been made. If anyone has any information on this it would be appreciated.

  2. #2
    I just installed new firmware as well. I have C1 Mono configuration, so no new firmware for that yet, but new firmware for L1, X1, P1, M1, A1, and T1. I did have a little difficulty getting firmware to install on one of the M1s. Still wont take it, but i'm sure they'll solve it. Anyway, I caught the dimming feature immediately-- I wish the lowest dim setting was a little brighter. 30% is pretty dim. Otherwise, I didn't detect any audible differences at least that I could tell. I think the date feature is terrific for the software releases-- it's so hard to tell otherwise, having to check all the individual components against a number. Also on my wish list would be updates pushed via internet vs. having to go thru the USB stick process. And, while I'm on my wish list, TIDAL integration and MQA would be nice too!

  3. #3
    Member Sponsor Senior Member
    Join Date
    Nov 2013
    Posts
    173
    I updated last month as well. One of the additional features for the CH App users is that the unit icons glow red when power up. If they hlow orange, that indicstes that there is a new firmware update available. Like others, i appreciate the visual cue or date so it is known that we can update the firmware without needing to sift through the website under each CH unit’s available downloads to check when updates are available.
    Many thanks to the talented and responsive Raphael, Loris, Eduard and the rest of the gang at CH. Excellent customer service.

  4. #4
    Addicted to Best!
    Join Date
    Sep 2013
    Location
    Dallas area
    Posts
    230
    CH Precision have just released another microcode update for D1/C1/L1/M1. I have the latest CH control application and the icons for these pieces turned yellow the other night as Tunes describes above indicating an update was available. There are no release notes so its hard to say what was changed/fixed. There were likely some problems reported with the November update that were addressed with this release. All updates installed easily with no installation problems as usual. One enhancement I noticed was on the C1 page when streaming. There is a ďbackĒ button now (itís an arrow in the upper left) that helps you to navigate your libray more easily. Useful feature enhancement. Everything working perfectly after the update.

  5. #5
    Member Sponsor Senior Member
    Join Date
    Nov 2013
    Posts
    173
    As Ralph has noted, firmware updates available last week.
    The CH app has also had a second update a voupke of dsys ago.
    CH noted that:
    “The new firmware revision package mainly deals with the introduction of the T1 clock generator and the C1 Mono units. There is some unification brought in the inner levels of the pieces of firmware and some new features in the CH control app, for example the preference dialog in the top menu, the explicit Back icon and the track numbers displayed next to the remaining track time.”
    Chris

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •