Results 1 to 2 of 2

Thread: REL T Zero crossover knob - why there are no other frequencies marked in between???

  1. #1
    Member
    Join Date
    Feb 2015
    Location
    Dallas, TX
    Posts
    25

    REL T Zero crossover knob - why there are no other frequencies marked in between???

    The crossover knob goes from 30Hz to 120Hz.
    Does anyone know if the crossover scale on T series Subwoofer is linear i.e. 75Hz at 12 o'clock?
    (120-30=90 so half way there is 45 plus starting point at 30Hz gives 75Hz at 12 o'clock)
    Last edited by mirekti; 01-29-2017 at 08:40 PM.

  2. #2
    Junior Member JustinM's Avatar
    Join Date
    May 2017
    Location
    Oakland, CA
    Posts
    1
    mirekti,

    The scale on the crossover control is not linear, so I'm pretty sure 12 o'clock is not -3dB point at 75Hz. It's closer to 50Hz.
    In our experience setting up Tzeros, 12 o'clock is the best place to start with both the crossover and level controls. Most room set are within +/- 3 clicks from that 12 o'clock position. By click, I mean the detents you can feel with exercising the controls.

    I'm sorry there are no marks between the min and max of the crossover control of the Tzero. I'm sure this was a style decision.

    Hope this helps,

    Justin
    Chief Engineer
    REL Acoustics
    Chief Engineer REL Acoustics

Similar Threads

  1. speaker measurement at lower frequencies
    By almikel in forum Acoustics and Room EQ Forum
    Replies: 6
    Last Post: 05-21-2013, 10:01 AM
  2. DEQX calibration at low frequencies - best approach?
    By almikel in forum DEQX Speaker and Room Correction Forum
    Replies: 0
    Last Post: 05-17-2013, 03:03 AM
  3. Why do tube amps roll off high frequencies?
    By MadFloyd in forum Audio, Video And Computer Technology Expert Forum
    Replies: 8
    Last Post: 11-28-2012, 12:58 PM
  4. Diffuser frequencies and listener distance
    By Nordenstam in forum Room Acoustics Forum
    Replies: 13
    Last Post: 11-19-2010, 05:42 PM
  5. I just lost all of the upper mid-to-high frequencies!
    By Johnny Vinyl in forum Cartridges
    Replies: 15
    Last Post: 08-02-2010, 11:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •