Thank you for the latest information Grant. Are this the 1.75m prices? Or shorter length powercords.
Wish they sold for prices close to that in Europe. Seems like we pay a heck of a lot more.
If you want noise reduction, select a NR model.
What is gained by using a power cord with noise reduction when it is used to power a component off a Denali?
I'm particularly wondering about the case of a music server. Per Shunyata's website, the Venom Digital, for example, benefits by "reducing the output of high-frequency noise and preventing this noise from affecting the performance of other components". Shouldn't that be less necessary with a Denali?
What is gained by using a power cord with noise reduction when it is used to power a component off a Denali?
I'm particularly wondering about the case of a music server. Per Shunyata's website, the Venom Digital, for example, benefits by "reducing the output of high-frequency noise and preventing this noise from affecting the performance of other components". Shouldn't that be less necessary with a Denali?
Thanks for the question, I hope this helps provide some answers.
One more question though. Back to the computer used only as a music server. In my case the only connection this computer makes to my audio system is via an ethernet cable to a streaming endpoint. Would there be any benefit from use of a power cord better than the Venom Digital?
Will there be no HC versions of the new Delta, Alpha, and Sigma?
Will the new Delta or Alpha be superior (because of their VTX conductors) to current Alpha HC (larger gauge but not VTX) when used to power a Denali?
Thanks.
Hi,
The new Delta NR (Noise Reduction), Alpha NR and Sigma NR power cords are all large gauge power cords at ten, eight and six-gauge respectively, which is more than heavy enough to power amplifiers of any kind. The Alpha NR has the same gauge as the Alpha HC. It will be improved over the Alpha HC in terms of performance on all components and has a new aesthetic, with the same head-shells as Sigma, but its not night-to-day improvement, or worth switching from the HC to the NR for.
The power cord chosen to connect any of our power-distributors should be at least the equal of the best power cord going to components that are plugged into the units. In essence, the power cord to the wall increases in importance based on the number of components going into the distributor. At four or more components, the power cord to the wall should be the best quality power cord in the system, even a grade above the power cords on components.
The NR Series power cords will be shipping in about 2 weeks. The current models continue to be available through our dealers on promotion.
I hope this is of some help!
Best regards,
Grant
Grant,
I'm a little confused. On the Downloadable PDF on your website it says that the Alpha HC is a 7 gauge cord. So, would an Alpha NR actually be a step backwards for some applications?
Or does the VTX geometry the trade off with all but the most high current applications?
Thanks
Hi,
There is no trade-off or downside with the NR model. If anything our aggregate gauge ratings are conservative. The Alpha NR measures better than the HC in terms of peak current (DTCD) and in terms of comparative performance, has more weight and impact in the lower octaves. While its not a dramatic difference, the improvement over the HC are perceived wider-bandwidth, background silence and impact in sound when used on an amp or Hydra, but that can also apply to pre-amps, DAC's, CD players and Analog sources. If someone has an Alpha HC already I would not advocate they switch, unless that upgrade is to a Sigma model and the system merits that kind of upgrade expense. As always, the NR models will find their way into the market in the coming weeks and people can compare.
Best regards,
Grant
Thank you for the information Grant. Will the Shunyata website be changed to show these new products soon? I am looking forward to seeing pictures of the cables, and also, an in depth explanation of the KPIP (Kinetic Phase Inversion Process) if possible.
Hi,
Yes, the new products will appear on the website as they come available and we have photography.
The Kinetic Phase inversion Process has a video describing some of what it is, but more of what it does. We publish a great deal of information regarding the tech, materials and parts in the majority of our products, including seven published Patents and many that are pending. There are some processes-- wire, metals and parts treatment being among them, that Caelin prefers to keep to himself.
I would say of all the patents and custom-parts and tech Caelin has developed, the KPIP machines and process is number one in terms of what that does to improve power and signal related products. Two-days of conditioning with KPIP will improve new signal or power products beyond what is possible, even with years of normal use, burn-in devices or other metals treatment processes such as cryogenics. We will be expanding the use of this process to the new reference-lines of signal cables as they become available. Normal break-in of one-two weeks will become a thing of the past. KPIP products require 1-2 days of settling after shipment to achieve full performance potential. You should be able to experience the fully realized performance of new products almost immediately. There will be no more days 2-5 funk, or temporary drop in performance. Given the number of customers, dealers and recording professionals I have had to talk off the "day-3 break-in" ledge over the past 18 years, its a godsend in terms of getting the best out of new products without the wait.
Best regards,
Grant
Steve Williams Site Founder | Site Owner | Administrator | Ron Resnick Site Co-Owner | Administrator | Julian (The Fixer) Website Build | Marketing Managersing |