I have the UK 240 Volt variant. Serial numbers 10062 and 10063. I live in England, UK.
I don't know the exact age but guess probably around 20 years old. I bought them second hand in 2019 and have used them daily since then. Never serviced but I change the valves myself as needed and do not...
I recently bought 3 outer boxes of NOS tape manufactured by Racal Zonal in September 1979. Zonal RZ. Ten reels per outer box. All sealed, unused, unopened. Two boxes were fine but one box ( ten tapes ) must have been kept in different conditions because each tape box has brown/ reddish...
That is very helpful Jonathan. I knew about the rewind and FF different speeds but had no idea you could fly the tape above the tapehead block cover. It works ! Thank you !
Yes, it is set to maximum output gain. And yes it is set to maximum input gain. Extra 18db on Tape Out is available vis the continuously variable pots. So that is my question = how to set those pots.
Unfortunately Spectral USA won't help me because I am not in USA. And my nearest national Spectral Distributor in Germany also won't help because I didn't buy it from them or from one of their resellers. So, I am hoping that somebody here knows the answer ! I think that probably all these...
Tape Out from my Spectral does not give out sufficient gain into my Studer A810. It works well but would be better with higher gain. The preamp has "precision dial trimmers" ( under the hood ) on the main system board which allows for adjustment over a 18db range. Two of them = One for each...
Quite recently, I acquired a Studer A810 Mk II in excellent condition. It works very well and was completely overhauled in 2020.
However one thing concerns me : When in Fast Forward or Rewind, tape chatter is always heard through my loudspeakers. ( there is no monitor speaker on the Studer...
Yes. Quite so. But was bound tight shut and the gap where a screwdriver is inserted is miniscule. Eventually a squirt of WD40 and then using a watchmakers tool released it. Thanks for your help.
I have a DMC 30SS. Fuse has never been changed. The vertical fuse carrier drawer, between the mains plug inlet and the on / off switch, won't prise open. It fits flush all round with a very small gap at the plug inlet side. Putting a small screwdriver into that gap won't prise open the...
Currently using Vintage Rebuilt and Upgraded T N Williamson Monoblocks circa mid 1950s using original parts, Partridge C Core Output transformer, etc. with Tungsol KT120s or Kron KT88s. 30 wpc class A. Triode Mode. The Tungsol KT120s are preferable as they forsake a tad of refinement for better...
Using legacy Dynaudio Confidence 5s, each with Velodyne Subwoofer DD 12 inch alongside, fed from DMA250 and DMC30S. The Velodynes run from Balanced Outputs out of Preamp to their line inputs and the Dynaudios from normal spade outputs on DMA250. Preamp is connected to Power Amp via RCA, of...
EVENTUALLY : Bought a DMA250 in Germany. Had hum issue with it. But all now solved. Please see my separate posting to my original post, for details.
Have a question about adding Supertweeters which I will put on a new thread soon.
Thanks to everybody for support and help solving issues...
Eventually after long haul :
DMA250 went back to German Distributor who found missing earth strap. ( They checked out and brought unit up to spec just before I initially bought it. ) That fixed the nasty hum on right channel but still left small hum there which was audible from listening...
That's good to hear. Perhaps they only treat UK Customers in the way they treated me or perhaps they have decided to change their philosophy. Lets hope it is the latter rather than the former because they make excellent gear and deserve to be thought of highly.
To answer your questions in detail :
All interconnects are Spectral-Mit except to Satellite Box and to Oppo BluRay. ( considered unnecessary extra cost )
Present speaker cable is TA but I am waiting for new Spectral-Mit Speaker Cable. I will have new Spectral-Mit Speaker cables in about 6-8...
So far, the sound is very good. Still waiting to change Speaker Cables from the present Transparent Audio to Mit-Spectral UL 38HD SIII and am hoping that will make the final difference in dynamics, resolution and transparency.
Also will have to see if the Mit-Spectral Speaker Cables will stop...
All interconnects at now Mit-Spectral and changing from Transparent Audio Speaker Cables to Mit-Spectral soon. Only issues I have is (1) very low level, constant hum and (2) cannot change Phase ( polarity) without switching off power amp first because of nasty crack through speakers. I am...
Thanks - just got a DMA 250 ! So now on full Spectral amplification ! Are you are on valves in Hong Kong? I buy valves for my Phono Stage whenever I drop by in HK !
Thanks. Nice system you have there. I also use Velodynes and Entreq and Stillpoints. How do I get my equipment list to show as a footnote to posts, as you have done ?
Having previously started a discussion concerning experience when trying to obtain simple information from Spectral and being refused because there is no distributor in the UK, I would like to continue reporting but consider a new topic is now more suitable and will also avoid it being buried in...
Yes, that's because you are in SF Bay and you have bought New. How do you buy through an authorised dealer when you live in England where there is no authorised dealer - a bit tricky. So you do the next best thing and contact the manufacturer directly, only to be told, No we can't help you.
With the delay whilst trying to find out when the items for sale were manufactured, the Power Amp got sold. And that was the item of most interest - to replace my 17 year old Proceed HPA2. So now I have bought the Pre on a 14 day trial to see if that compares favourably with my present make...